Re: serious problem

Subject: Re: serious problem
From: Jon Elson <elson-at-pico-systems.com>
Date: Sat, 05 Oct 2002 01:58:42 -0500
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
Organization: Pico Systems
References: <000b01c26996$61a1f4d0$f500a8c0-at-LOGE> <200210031618.g93GIIeL008582-at-btc1.up.net> <007401c1043a$a5bebe40$89d73c04-at-Hassan> <200210041438.g94EcUeL014561-at-btc1.up.net> <009e01c104b3$b1220b60$89d73c04-at-Hassan>
Sender: elson

Hassan Rabe wrote:

> as for the computer it's a PII 470 MHz ..which is only  running the BDI
> 2.10.
> am not sure if i can switch to freqmod because the input to the controller
> Box (Drive Rack) is a pulse and direction for each axis.

The step./direction interface to the motor drivers is the same for steppermod
and freqmod.  The difference is that freqmod can give smoother steps.

The 470 MJz CPU should be fairly decent on freqmod.

Jon

References:
- following error question
  - From: "Richard Everett" <res0jyup-at-verizon.net>
- Re: following error question
  - From: Ray Henry <rehenry-at-up.net>
- serious problem
  - From: "Hassan Rabe" <rabeh-at-student.gvsu.edu>
- Re: serious problem
  - From: Ray Henry <rehenry-at-up.net>
- Re: serious problem
  - From: "Hassan Rabe" <rabeh-at-student.gvsu.edu>

Prev by Date: smdromod success
Next by Date: Re: smdromod success
Prev by thread: Re: serious problem
Next by thread: Re: following error question

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact