Re: following error

Subject: Re: following error
From: "Keith Rumley" <DSCADCAM-at-yahoo.com>
Date: Thu, 15 Nov 2001 20:06:07 -0500
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="iso-8859-1"
References: <20011113191007.R7214-at-wattle.taudelta.com.au> <01c501c16c71$100127e0$0303a8c0-at-telenic.net> <002201c16ca2$6ce2f700$ab9f0e3f-at-dgehlsen> <01fa01c16cc6$0689c0a0$0303a8c0-at-telenic.net> <006101c16d28$eeccc080$6f9a0e3f-at-dgehlsen> <021901c16d2e$70d03120$0303a8c0-at-telenic.net>


Another easy way to deactivate the Z-axis is simply to specify only two axes
in the 'Trajectory planner' section

; Trajectory planner
section --------------------------------------------------
[TRAJ]

AXES =                  2
COORDINATES =           X Y


- Keith


_________________________________________________________
Do You Yahoo!?
Get your free -at-yahoo.com address at http://mail.yahoo.com

References:
- Re: following error
  - From: John Sheahan <jrsheahan-at-optushome.com.au>
- Re: following error
  - From: "Ed Okerson" <eokerson-at-fw.telenic.net>
- Re: following error
  - From: "Darrell" <dgehlsen-at-earthlink.net>
- Re: following error
  - From: "Ed Okerson" <eokerson-at-fw.telenic.net>
- Re: following error
  - From: "Darrell" <dgehlsen-at-earthlink.net>
- Re: following error
  - From: "Ed Okerson" <eokerson-at-fw.telenic.net>

Prev by Date: Re: EMC and STG boards.
Next by Date: Out of sequence M01 pauses
Prev by thread: Re: installfromsource problems...
Next by thread: Following error

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact