Re[4]: Lathe & Mill

Subject: Re[4]: Lathe & Mill
From: Richard <phebos-at-btinternet.com>
Date: Thu, 7 Nov 2002 11:06:17 +0000
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
In-Reply-To: <200211062039.gA6KdOcC025552-at-btc1.up.net>
Organization: none
References: <1481803262234.20021106123736-at-btinternet.com> <200211061735.gA6HZGcC002485-at-btc1.up.net> <1571826129187.20021106185843-at-btinternet.com> <200211062039.gA6KdOcC025552-at-btc1.up.net>
Reply-To: Richard <phebos-at-btinternet.com>


Hello Ray,

Wednesday, November 6, 2002, 8:46:48 PM, you wrote:

RH> Paul Corner, the maintainer of the BDI, has just been working out some 
RH> separations between the motion stuff and drivers.

Paul and I both live in England Ray, so naturally we have bumped
into each other <bg>

-- 
Best regards,
 Richard                            phebos-at-btinternet.com

References:
- Lathe & Mill
  - From: Richard <phebos-at-btinternet.com>
- Re: Lathe & Mill
  - From: Ray Henry <rehenry-at-up.net>
- Re[2]: Lathe & Mill
  - From: Richard <phebos-at-btinternet.com>
- Re: Re[2]: Lathe & Mill
  - From: Ray Henry <rehenry-at-up.net>

Prev by Date: Re[4]: Lathe & Mill
Next by Date: Re: control panel
Prev by thread: Re: Re[2]: Lathe & Mill
Next by thread: Re: Re[2]: Lathe & Mill

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact