Re: need help compiling EMC

Subject: Re: need help compiling EMC
From: "hassan rabe" <rabeh-at-student.gvsu.edu>
Date: Fri, 2 Aug 2002 23:49:46 -0400
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="iso-8859-1"
References: <20020803073622.P10100-at-wattle.taudelta.com.au> <001801c23a6e$8cc96e60$2264a8c0-at-tim> <20020803082857.Q10100-at-wattle.taudelta.com.au>


am using steppermod....and i configured the ini file for 1
inch/second2...max acceleration, 0.5 inch/second2....is there a certain
procedure to determine all of these variables...i mean the acceleration and
the velocity....when the motor starts to run ...the current will drop to 1.5
A...the power supp;y can provide 2 A....the voltage is 3.2 V across the
windings...and even with that current...i can easily stop the motor by
holding the shaft with my fingers in the data sheet for the motor...it says
that the motor can provide 2 N.m torque.

regards
hassan

Follow-Ups:
- Re: need help compiling EMC
  - From: "Peter Cook" <kf2qd-at-terraworld.net>
- Re: need help compiling EMC
  - From: Ray Henry <rehenry-at-up.net>

References:
- Re: need help compiling EMC
  - From: John Sheahan <jrsheahan-at-optushome.com.au>
- RE: need help compiling EMC
  - From: "Tim Goldstein" <timg-at-ktmarketing.com>
- Re: need help compiling EMC
  - From: John Sheahan <jrsheahan-at-optushome.com.au>

Prev by Date: Re: need help compiling EMC
Next by Date: Re: need help compiling EMC
Prev by thread: Re: need help compiling EMC
Next by thread: Re: need help compiling EMC

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact