Re: 4th axis config

["illya" <illya-at-d2.net.au>]

Thanks Ray that was easy.
I spent most of tonight trying.

Thank you
Illya

----- Original Message -----
From: "Ray Henry" <rehenry-at-up.net>
To: "Multiple recipients of list" <emc-at-nist.gov>
Sent: Monday, June 10, 2002 12:35 AM
Subject: Re: 4th axis config


>
>
> Illya
>
> You don't need these files.  With the recent sourceforge that you built,
the
> tkemc gui will display all of the axes that you have defined in your ini
> file.  I believe that the fourth axis [AXIS 3] will be considered by the
> interpreter as the A axis.
>
> [TRAJ]
>
> AXES =                  4
> COORDINATES =           X Y Z A
> HOME =                  0 0 0 0
>
> If you need B rather than A define five axes and use the same settings
above
> except name it X Y Z B and ignore that extra axis in the middle.
>
> Ray
>
>
>
> On Saturday 08 June 2002 21:54, you wrote:
> > Hi all
> >
> > Can anyone help me with 4th axis setup?
> > I downloaded mini4 setup files from http://www.linuxcnc.org/dropbox/
> > but they won't run. The files have =0A= all through them. I can clean up
> > the mini4.ini, but mini4.run & tkemc4.4 seems to be too easy to mess up
the
> > code.
> >
> > Thank You
> > Illya
>
>
>