Re: Ini file

Subject: Re: Ini file
From: "J. DeFreese" <defreese-at-gate.net>
Date: Sat, 30 Mar 2002 22:22:47 -0500
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
References: <003e01c1d610$f3be99a0$2264a8c0-at-tim> <02032904135300.01106-at-blackbox.localdomain> <E16r4ms-0002P9-00-at-receipt.tesco.net>


unsubscribe

Paul wrote:

> Hi Dean
>
> This sounds like a classic case of OUTPUT_SCALE and INPUT_SCALE not being the
> same - Check your ini file and make sure these two parameters are the same
> for all axes.
>
> Regards, Paul.
>
> On Friday 29 March 2002 21:18, Dean L. Hedin wrote:
> > I've tried modifying emc.ini to use freqmod.o instead of steppermod.o
> > and I can't seem to get it to work.
> >
> > EMC fires up OK but when I try to move an axis, it moves about 3 steps
> > and then I get an "axis 0 following error" dialog.

References:
- RE: Ini file
  - From: "Tim Goldstein" <timg-at-ktmarketing.com>
- Re: Ini file
  - From: "Dean L. Hedin" <dlh2001-at-comcast.net>
- Re: Ini file
  - From: Paul <paul.corner-at-tesco.net>

Prev by Date: Stewart platform kinematics (genhexkins)
Next by Date: Re: Stg/Emc Jogging problem
Prev by thread: Re: Testing EMC list server...
Next by thread: Re: Ini file

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact