Re: Ini file

Subject: Re: Ini file
From: Paul <paul.corner-at-tesco.net>
Date: Fri, 29 Mar 2002 21:29:00 +0000
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="iso-8859-1"
In-Reply-To: <02032904135300.01106-at-blackbox.localdomain>
References: <003e01c1d610$f3be99a0$2264a8c0-at-tim> <02032904135300.01106-at-blackbox.localdomain>

Hi Dean

This sounds like a classic case of OUTPUT_SCALE and INPUT_SCALE not being the 
same - Check your ini file and make sure these two parameters are the same 
for all axes.

Regards, Paul.

On Friday 29 March 2002 21:18, Dean L. Hedin wrote:
> I've tried modifying emc.ini to use freqmod.o instead of steppermod.o
> and I can't seem to get it to work.
>
> EMC fires up OK but when I try to move an axis, it moves about 3 steps
> and then I get an "axis 0 following error" dialog.

Follow-Ups:
- Re: Ini file
  - From: "J. DeFreese" <defreese-at-gate.net>
- Re: Ini file
  - From: "Dean L. Hedin" <dlh2001-at-comcast.net>

References:
- RE: Ini file
  - From: "Tim Goldstein" <timg-at-ktmarketing.com>
- Re: Ini file
  - From: "Dean L. Hedin" <dlh2001-at-comcast.net>

Prev by Date: Re: Ini file
Next by Date: Re: Ini file
Prev by thread: Re: Ini file
Next by thread: Re: Ini file

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact