Stg/Emc Jogging problem

Subject: Stg/Emc Jogging problem
From: "jim scott" <jscott-at-tinet.ie>
Date: Tue, 26 Mar 2002 22:42:19 -0800
Content-Type: multipart/mixed; boundary="------------InterScan_NT_MIME_Boundary"
Reply-To: "jim scott" <jscott-at-tinet.ie>

Hi,

While making adjustments to to P,I &D I noticed that if two axis are jogged simultaneously , one axis will latch on and will only stop if its jog key is pressed again.I am using EMC in conjunction with a ServoToGo 2 ,8 axis card.Any help would be appreciated,

Jim.

Follow-Ups:
- Re: Stg/Emc Jogging problem
  - From: "Peter Cook" <kf2qd-at-terraworld.net>
- RE: Stg/Emc Jogging problem
  - From: Kurtis Martineau <klmartineau-at-shaw.ca>
- Re: Stg/Emc Jogging problem
  - From: "William Scalione" <wscalione-at-nc.rr.com>
- Re: Stg/Emc Jogging problem
  - From: "biese.ronald" <biese.ronald-at-wanadoo.fr>
- Re: Stg/Emc Jogging problem
  - From: "Les Watts" <leswatts-at-rabun.net>

Prev by Date: Re: NIST
Next by Date: Re: Stg/Emc Jogging problem
Prev by thread: bdi install questions- iopener
Next by thread: Re: Stg/Emc Jogging problem

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact