Re: Freqmod problems

Subject: Re: Freqmod problems
From: rehenry <rehenry-at-up.net>
Date: Tue, 12 Feb 2002 15:33:32 -0600
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="iso-8859-1"
In-Reply-To: <00a001c1b3dd$cb449ba0$0100a8c0-at-mcleodusa.net>
References: <001b01c1b357$23bcffc0$0100a8c0-at-mcleodusa.net> <200202121537.g1CFbTHY002715-at-smtp.up.net> <00a001c1b3dd$cb449ba0$0100a8c0-at-mcleodusa.net>
Reply-To: rehenry-at-up.net

Well! (he says shaking his head)  That's not the problem.  Since freqmod 
doesn't really know what is happening on the machine, I have to say that 
getting following errors has to be a matter of the setup in the ini.

What values are you using for p i d? 

How about a bit higher P value?

Ray

On Tuesday 12 February 2002 10:10 am, Shelbyville Design & Signworks 
wrote:
> ray,
> right now I have a max traj of 1.75,
> max velocity of 1.25 per axis
> accel set to 1.0
> max accel se to 1.0

Follow-Ups:
- Re: Freqmod problems
  - From: Paul <paul.corner-at-tesco.net>
- Re: Freqmod problems
  - From: "Shelbyville Design & Signworks" <signworks-at-mcleodusa.net>

References:
- Freqmod problems
  - From: "Shelbyville Design & Signworks" <signworks-at-mcleodusa.net>
- Re: Freqmod problems
  - From: rehenry <rehenry-at-up.net>
- Re: Freqmod problems
  - From: "Shelbyville Design & Signworks" <signworks-at-mcleodusa.net>

Prev by Date: Re: problems getting started
Next by Date: Re: problems getting started
Prev by thread: Re: Freqmod problems
Next by thread: Re: Freqmod problems

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact