Re: rtlinux for 2.4.16

[Paul <paul.corner-at-tesco.net>]

On Saturday 15 December 2001 6:14 pm, Ian Wright wrote:

Hi Ian

Nooo...... There are two patches in the tarball at 
http://sourceforge.net/project/showfiles.php?group_id=27386 
One is applied to the kernel, the other to rtlinux-3.1. No more patching is 
required - Ignore the kernel_patch-2.4.4, this is not needed.

I compiled a kernel using this patch, compiled without a hitch, as did the 
rtlinux sources after the obligatory reboot. Come to insmod rtl.o and the 
whole thing locked up - Serious session on the reboot with fsck in manual 
mode.

Regards, Paul.


> Hi Paul,
>
> Thanks, I got the patch down the other day but I haven't managed to make it
> work yet (3 tries so far). The problem is that I patch the rtlinux-3.1
> files OK but then when I try to patch rtlinux to the kernel (using
> kernel_patch-2.4.4 which seems to be the only one there and also seems to
> be the one referred to in the 2.4.16 patch) I get a load of errors saying
> that the kernel has been previously patched blahdy blahdy blah.
> I initially tried also patching the kernel from the 2.4.16 patch before
> applying the rtlinux patch but I realised that this was probably not the
> right sequence and gave all the same errors anyway. I did, of course, clean
> things down and reinstall the kernel and rt sources between tries.
>
> The kgcc thing seemed to work OK as I have built a 2.4.16 kernel without
> rtlinux successfully - this is against a RedHat 7.2 installation.
>
> Ian