Re: G2 X Y I J problem

Subject: Re: G2 X Y I J problem
From: Max Heise <mahe-at-bandstahlschnitte.de>
Date: Fri, 4 May 2001 01:42:43 +0200
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
In-Reply-To: <3AF13B29.30BF27DC-at-elltel.net>
References: <3AF13B29.30BF27DC-at-elltel.net>
Reply-To: max.heise-at-gmx.net


Hello Dave,

I had the same problem with data coming out of the CAD system here, Will helped
me get out of that. For the new interpreter just edit emc/src/rs274ngc_new/rs274ngc.hh, look for: 
#define TOLERANCE_INCH 0.0002
#define TOLERANCE_MM 0.002 
And change those according to your needs and recompile.

Regards
Max

-- 
Max Heise <max.heise-at-gmx.net>
Student Mechatronik/Automatisierungstechnik
PGP public key from:
http://www.fht-esslingen.de/~mahemt01/pgp50i.pub or any keyserver

References:
- G2 X Y I J problem
  - From: dave engvall <dengvall-at-elltel.net>

Prev by Date: Spontaneous losses of the index pulse
Next by Date: newbie needs general info!
Prev by thread: Re: G2 X Y I J problem
Next by thread: Kearney and Trecker

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact