Re: New GUI

["William Scalione" <wscalione-at-nc.rr.com>]

Hi Ray,

When I download mini.tgz and look at the code for the actual mini tcl file
it appears to end here,


        if { $lastjointworld == "world" } {
            if {$coords == "relative" && $actcmd == "commanded"} {
                set whizbang {emc_rel_cmd_pos}
            } elseif {$coords == "relative" && $actcmd == "actual"} {
                set whizbang {


Please have a look and tell me if this is just a problem on my end or if the
uploaded file is corrupt.


Thanks,

Bill



----- Original Message -----
From: "Ray Henry" <rehenry-at-up.net>
To: "Multiple recipients of list" <emc-at-nist.gov>
Sent: Thursday, April 03, 2003 2:13 PM
Subject: New GUI


>
>
> List
>
> I placed two files in www.linuxcnc.org/dropbox.
>
> mini4-3-03.tgz
> mini4-3-03.txt
>
> The tar file will install a complete gui system on BDI releases.  You
should
> place that file in the (/) directory and issue
>
> tar xzvf mini4-3-03.tgz
>
> After you have done that an x-windows restart should show three icons and
> three links on your root desktop.  These lead to the startup of run and
ini
> files that I've set up for 1/4 stepped Sherline mills.  The links should
> start your editor with the relevant ini ready for edit.
>
> If you load these on TNG you should only run the mill_inch_freq version
the
> stepper versions will not run on that release.  You could change these ini
> files to freqmod and stepping_type = 4 for the binning stuff.
>
> I've tested these with a 333 Mhz laptop and 800 via desktop systems.  Only
> the frequency version may require editing of the period parameter but you
may
> need to edit the address of your parport.  A machine should not be
required
> to test them out.
>
> Let me know what you think.
>
> Ray
>
>
>
>