Re: FPGA for PCI based servo control board

Subject: Re: FPGA for PCI based servo control board
From: John Sheahan <jrsheahan-at-optushome.com.au>
Date: Sat, 5 Apr 2003 14:21:49 +1000
Content-Disposition: inline
Content-Type: text/plain; charset=us-ascii
In-Reply-To: <015b01c2fb0b$d587bd10$6901a8c0-at-wksta>
References: <OF58365977.2668A91C-ON85256CFE.004B235D-at-ra.rockwell.com> <20030405000916.GE21011-at-cockatoo.taudelta.com.au> <015b01c2fb0b$d587bd10$6901a8c0-at-wksta>
Reply-To: jrsheahan-at-optushome.com.au
User-Agent: Mutt/1.4i

On Fri, Apr 04, 2003 at 07:42:50PM -0500, Dave Engvall wrote:
> 
> OK....so do I hear correctly...that you want one board in the CPU box and
> another out in the real world...ie more complexity to deal with.

I'd put a NIC in the PC. a standard NIC. 
If there is on the motherboard unused and a driver exists, 
use it by all means.    certainly no custom development.

References:
- Re: FPGA for PCI based servo control board
  - From: jmkasunich-at-ra.rockwell.com
- Re: FPGA for PCI based servo control board
  - From: John Sheahan <jrsheahan-at-optushome.com.au>
- Re: FPGA for PCI based servo control board
  - From: "Dave Engvall" <dengvall-at-charter.net>

Prev by Date: Re: FPGA for PCI based servo control board
Next by Date: Re: New GUI
Prev by thread: Re: FPGA for PCI based servo control board
Next by thread: Re: FPGA for PCI based servo control board

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact