Re: Following error

["William Scalione" <wscalione-at-nc.rr.com>]

Irfan,

If you can cut and paste your INI file here, that will help someone help
you.
Following errors are a common problem, and probably just an INI file
problem.
Do you have the INPUT_SCALE and OUTPUT_SCALE set the same?

Bill
----- Original Message -----
From: "Irfan Younis" <irfan_younis-at-yahoo.com>
To: "Multiple recipients of list" <emc-at-nist.gov>
Sent: Wednesday, January 01, 2003 10:11 AM
Subject: Following error


>
> Dear Users,
>              I am a new user of EMC, before some days
> I installed successfully BDI 2.16 on my computer, I am
> using PII HP Kayak builtin mother bord (VGA and Sound)
> with 64 MB ram. I want to control Bridgeport Series I
> CNC machine with stepper motors. Motors is 56v 8.5A
> and 5 wires one coman and 4 for step and direction.
> When I command to move any axes then I get one error
> which is Following Error. I have adjust to PID, P=1 to
> 1000 I=1 to 100 D=1 to 100 but the error is still
> there. Please help me in setting the ini file and PID
> gains. Thanks.
>
> Regards,
> Irfan
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
>