.ini documentation was Re: Working ... but not quite

Subject: .ini documentation was Re: Working ... but not quite
From: robin szemeti <robin-at-rszemeti.demon.co.uk>
Date: Mon, 16 Sep 2002 16:01:47 +0100
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="iso-8859-1"
In-Reply-To: <003501c25d8a$42931280$23241a42-at-.bdfrd.tx.home.com>
Organization: home
References: <200209152344.g8FNirt02474-at-rszemeti.demon.co.uk> <200209161222.g8GCM456025300-at-btc1.up.net> <003501c25d8a$42931280$23241a42-at-.bdfrd.tx.home.com>
Reply-To: robin-at-rszemeti.demon.co.uk


On Monday 16 September 2002 15:12, William Scalione wrote:
> Also for SHMEM KEY here is the answer I got from paul the other day

<snip> 


> The variables below are only used in the simulations.  You could replace 
> some of the values with those of your servo system and sim will show how 
> it will work.  I haven't tried it but they might be useful for getting 
> some preliminary PID tuning values for a servo setup.

thanks for that .. I've added it ..

many thanks.

--
Robin Szemeti

Follow-Ups:
- Re: .ini documentation
  - From: Paul <paul.corner-at-tesco.net>

References:
- Working ... but not quite
  - From: robin szemeti <robin-at-rszemeti.demon.co.uk>
- Re: Working ... but not quite
  - From: Ray Henry <rehenry-at-up.net>
- Re: Working ... but not quite
  - From: "William Scalione" <wscalione-at-nc.rr.com>

Prev by Date: Re: Working ... but not quite
Next by Date: Parallel port Primer
Prev by thread: Re: Working ... but not quite
Next by thread: Re: .ini documentation

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact