Re: Jog wheel (with code attached)

Subject: Re: Jog wheel (with code attached)
From: Paul <paul.corner-at-tesco.net>
Date: Tue, 4 Jun 2002 15:30:38 +0100
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="iso-8859-1"
In-Reply-To: <02060400072102.01877-at-linux.workgroup>
References: <725301F4D1E9D411A69F0002A507428E9422F7-at-nt-rmna-exch.ca.broadcom.com> <200206040237.g542bERC000335-at-btc1.up.net> <02060400072102.01877-at-linux.workgroup>

Hi Matt, Brian

After my earlier response, attached is one tarball to be extracted to the 
emc/src directory.
cd in to emc/src/drivers and do a "make PLAT=linux_$VER" and it *should* 
compile without errors.

Regards, Paul.

On Tuesday 04 Jun 2002 5:06 am, Matt Shaver wrote:
> I haven't got a clue how to integrate this into the EMC ;)... Should it be
> a function like "void handwheel()"? Is it installed from emc.ini? A
> loadable module? What calls it?

Follow-Ups:
- Re: Jog wheel (with code attached)
  - From: Ray Henry <rehenry-at-up.net>

References:
- RE: info
  - From: "Dave Hylands" <dhylands-at-broadcom.com>
- Re: Jog wheel (with code attached)
  - From: Ray Henry <rehenry-at-up.net>
- Re: Jog wheel (with code attached)
  - From: Matt Shaver <mshaver-at-erols.com>

Prev by Date: Re: Jog wheel
Next by Date: Re: Jog wheel
Prev by thread: Re: Jog wheel (with code attached)
Next by thread: Re: Jog wheel (with code attached)

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact