problem with the ini procedure

Subject: problem with the ini procedure
From: "hassan rabe" <rabeh-at-student.gvsu.edu>
Date: Fri, 17 May 2002 02:47:06 -0400
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="iso-8859-1"
References: <7f.263684f7.2a15d8ee-at-aol.com> <008001c1fd5d$f14c2650$1201a8c0-at-noyoudont>


hi all,
am having some problems with the emc, because it will stop responding when i
get it out of the e-stop to machine on....and this only happens when the
parallel port is connected to the controller of the stepper motors...
the way am dealing with this problem now...is that i disconnect the cable
from the computer...start the computer ....start emc ...get it out of the
e-stop to machine on...then connect the parallel port to the machine....is
there a better way to deal with this problem????

Follow-Ups:
- Re: problem with the ini procedure
  - From: Ray Henry <rehenry-at-up.net>

References:
- BDI
  - From: Webstercnc-at-aol.com
- EMC Documentation
  - From: "Ryan Verner" <xfesty-at-computeraddictions.com.au>

Prev by Date: Re: EMC/RTLinux running under Debian.
Next by Date: Re: EMC/RTLinux running under Debian.
Prev by thread: EMC Documentation
Next by thread: Re: problem with the ini procedure

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact