RE: PCI I/O cards


Don,
Where is my pci card?
Eric

-----Original Message-----
From: emc-at-nist.gov [emc-at-nist.gov]On Behalf Of Don McLane
Sent: Saturday, December 08, 2001 8:29 PM
To: Multiple recipients of list
Subject: Re: PCI I/O cards



The STG card has 32 bits of digital input.  Isn't that enough?  Of course,
we're not PCI yet.

Don McLane
Servo To Go, Inc.

At 11:46 AM 11/30/01 -0500, you wrote:

>This is a multi-part message in MIME format.
>
>--------------InterScan_NT_MIME_Boundary
>Content-type: multipart/alternative;
>  boundary="Boundary_(ID_KUzl4HCuPVZJ1AAgI0loPg)"
>
>--Boundary_(ID_KUzl4HCuPVZJ1AAgI0loPg)
>Content-type: text/plain; charset=iso-8859-1
>Content-transfer-encoding: 7BIT
>
>Calling Linux programmers,
>
>My EMC application requires more I/O than is presently configured to the
>parallel port with the Bridgeport "plc".
>I am hoping to move the parallel port stuff (lube,spindle,coolant,estop) to
>a Sealevel PCI Bus 48 TTL Digital I/O Interface as well as incorporate the
>remaining I/O.
>(8 tool limit switches, remote pendant functions, x and y axis brakes)
>The software that came with the Sealevel card has two steps:
>step 1.  =  install drivers.  This worked and prompted installation
>complete.
>step 2.  =  load drivers.  This uses the mknod command to create device
>special files.  Running the load drivers resulted in :  mknod: wrong number
>of arguments
>The manufacturer of the card (Sealevel) assures me that the program works
on
>Linux.
>How can I read and write to this PCI card the way I do with the Servo to Go
>card.
>
>The next step will be to include STG analog inputs of spindle speed and
>spindle load on the Tkemex Gui.  Ray says the GUI stuff is the easy part.
>
>Kurtis
>
>
>
>--Boundary_(ID_KUzl4HCuPVZJ1AAgI0loPg)
>Content-type: text/html; charset=iso-8859-1
>Content-transfer-encoding: 7BIT
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>Calling Linux programmers,
>
>My EMC application requires more I/O than is presently configured to the
>parallel port with the Bridgeport "plc".
>I am hoping to move the parallel port stuff (lube,spindle,coolant,estop)
>to a Sealevel PCI Bus 48 TTL Digital I/O Interface as well as incorporate
>the remaining I/O.
>(8 tool limit switches, remote pendant functions, x and y axis brakes)
>The software that came with the Sealevel card has two steps:
>step 1.  =  install drivers.  This worked and prompted installation
complete.
>step 2.  =  load drivers.  This uses the mknod command to create device
>special files.  Running the load drivers resulted in :  mknod: wrong
>number of arguments
>The manufacturer of the card (Sealevel) assures me that the program works
>on Linux.
>How can I read and write to this PCI card the way I do with the Servo to
>Go card.
>
>The next step will be to include STG analog inputs of spindle speed and
>spindle load on the Tkemex Gui.  Ray says the GUI stuff is the easy part.
>
>Kurtis
>
>
>
>
>--------------InterScan_NT_MIME_Boundary--
>--Boundary_(ID_KUzl4HCuPVZJ1AAgI0loPg)
>
>
>--Boundary_(ID_KUzl4HCuPVZJ1AAgI0loPg)--
>--------------InterScan_NT_MIME_Boundary--
Date Index | Thread Index | Back to archive index | Back to Mailing List Page

Problems or questions? Contact