Display and scale

Subject: Display and scale
From: "Ian Wright" <Ian-at-iw63.freeserve.co.uk>
Date: Sat, 3 Mar 2001 17:56:57 -0000
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="iso-8859-1"
References: <001701c0a08e$285f2c60$6be03ecb-at-splintspc> <01030108402500.02929-at-pup.ray1domain.com> <000c01c0a2fa$fc486320$43e03ecb-at-splintspc> <01030208091501.06273-at-pup.ray1domain.com>


Hi,

Has anyone yet mananged to get EMC (TKEmc) to display in metric units? I
have tried several ways to get it to do so but each time I try it objects
and crashes.

Also, when I enter distances in metric using G21, it is dividing by ten -
i.e. I enter 100 and the machine only moves 10mm. Any idea what I should
change? I have tried multiplying the 'input scale' by ten from, in my case,
3255 to 32550, but this causes the computer to slow down to almost a
standstill.

Ian
--
Ian W. Wright
Sheffield  UK
www.iw63.freeserve.co.uk

Follow-Ups:
- Re: Display and scale
  - From: Ray <rehenry-at-up.net>
- Re: Display and scale
  - From: Paul <Paul.Corner-at-tesco.net>

References:
- Clarification on a few things
  - From: "David Preston" <Dpreston-at-netlink.com.au>
- Re: Clarification on a few things
  - From: Ray <rehenry-at-up.net>
- Re: Clarification on a few things
  - From: "David Preston" <Dpreston-at-netlink.com.au>
- Re: Clarification on a few things
  - From: Ray <rehenry-at-up.net>

Prev by Date: BDI Kernel
Next by Date: Re: Display and scale
Prev by thread: Re: Clarification on a few things
Next by thread: Re: Display and scale

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact