Startup Defaults

Subject: Startup Defaults
From: "Graham Hollis" <ghollis-at-sprynet.com>
Date: Fri, 2 Feb 2001 12:25:48 -0800
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="iso-8859-1"
References: <OF65B308FA.D96FFAB3-ON872569E7.006543B9-at-inel.gov> <01020219455500.00276-at-Babylon>


Is there some way to set the startup defaults for EMC. I am running in
metric mode with a base unit of 1 in the .ini file but the program starts up
in G20 mode when I would like it to be in G21 mode. This has caught me a few
times when I issue a g00 x10 expecting a move of 10mm but the axis flys off
for a 10 inch move.

Thanks, Graham Hollis

Follow-Ups:
- Re: Startup Defaults
  - From: Ray <rehenry-at-up.net>
- Re: Startup Defaults
  - From: Henry Palonen <henkka-at-yty.net>

References:
- Tk_Menu error
  - From: RJH-at-inel.gov
- Re: Tk_Menu error
  - From: Paul <Paul.Corner-at-tesco.net>

Prev by Date: Re: Tk_Menu error
Next by Date: Re: TK_Menu error
Prev by thread: Re: Tk_Menu error
Next by thread: Re: Startup Defaults

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact