Re: EMC modes

Subject: Re: EMC modes
From: Jon Elson <jmelson-at-artsci.wustl.edu>
Date: Thu, 26 Oct 2000 00:32:27 -0500
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
References: <00102322004601.00258-at-paul> <39F4BF10.977020AB-at-artsci.wustl.edu> <00102523415703.00276-at-paul> <003d01c03ee7$e90ec280$49ecbfa8-at-dgehlsen>

Darrell wrote:

> Does this mean that you can not start a G41 positioning move
> on a G00 move?

I don't know, I don't use G00 much on my current setup.  But, the
original writer seemed to say so.  Of course, he may have gotten
caught up in restarting a program that was aborted with the G41
modal command still active.  This will definitely cause a mess or
error, if you execute moves designed for no radius comp. when the radius

comp is still on!

Jon

References:
- EMC and metric units
  - From: Paul Corner <paul.corner-at-tesco.net>
- Re: EMC and metric units
  - From: Jon Elson <jmelson-at-artsci.wustl.edu>
- Re: EMC modes
  - From: Paul Corner <paul.corner-at-tesco.net>
- Re: EMC modes
  - From: "Darrell" <dgehlsen-at-earthlink.net>

Prev by Date: RE[2]: compiler survey requested
Next by Date: part IV: alpha, linux-2.4.0-test9, & rtlinux-3.0-pre8 update
Prev by thread: Re: EMC modes
Next by thread: emc & rtlinux questions and suggestions

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact