Re: new EMC release / rtlinux-2.2 problem

["Ian Wright" <Ian-at-iw63.freeserve.co.uk>]

Hi,

I too am having the same problems as William but I don't seem to be clever
enough to correct them. I am getting exactly the same error message when I
get as far as 'make bzImage'. I ran the 'ls -ld' commands and got the same
message for the first.

The second gave me only

lrwx......  2 root    root        4096    May 15    22:51    /usr/src/linux
(apparently no link although the file manager shows a link which, if I click
on it, then displays the contents of '/rtlinux-2.2/' )

and the third just told me there was no such file or directory
(confirmed by looking in file manager - there is no 'linux' directory within
/usr/src/(linux)rtlinux-2.2/include/ )

Can anyone help me sort this out please?  I am running Mandrake 7 on a P166
machine.

Ian

--
Ian W. Wright
Sheffield  UK


----- Original Message -----
From: Will Shackleford <shackle-at-cme.nist.gov>
To: Multiple recipients of list <emc-at-nist.gov>
Sent: 08 May 2000 19:56
Subject: Re: new EMC release


>
>
> > Date: Mon, 8 May 2000 14:27:01 -0400 (EDT)
> > Originator: emc-at-nist.gov
> > From: William Scalione <scalione-at-netarrant.net>
> > To: Multiple recipients of list <emc-at-nist.gov>
> > Subject: Re: new EMC release
> > X-Listprocessor-Version: 6.0c -- ListProcessor by Anastasios Kotsikonas
> > Content-Transfer-Encoding: 7bit
> > X-CC: scalione-at-netarrant.net
> > X-To: emc-at-nist.gov
> > MIME-Version: 1.0
> >
> >
> > I'm having a  problem trying to get my kernal compiled with
> > the real time ext. I allready have RH5.2 and EMC working great
> > but I thought I would try a upgrade. Removed the harddrive
> > and put in another (so I can always go back to 2.0.36 version)
> > formatted and installed RH 6.0 with kernal 2.2.5. downloaded
> > prepatched kernal 2.2a. Ran xconfig, "make dep", and "make clean"
> > So far so good. When I try "make zImage" or "make bzImage" I get the
> > following error. any ideawhat file is missing?
> >
> > root-at-;ocalhost# make zImage     (This line is what I type, below is waht
> > I get)
> >
> > gcc -Wall Wstrict-prototypes -O2 -fomit-frame-pointer -o
> > scripts/split-include scripts/split-include.c
> >
> > In file included from /usr/include/errno.h:36,
> >                  from scripts/split-include.c :26:
> > /usr/include/bits/errno.h:25: linux/errno.h: No such file or directory
> > make: *** [scripts/split-include] Error 1
> >
> > Thanks
> > Bill
> > scalione-at-netarrant.net
> >
>
> My guess would be that the directory setup has broken one of the
> symbolic links needed to find
> Here is what I have:
>
>
> shackle-at-feed> ls -ld /usr/include/linux
> lrwxrwxrwx   1 root     root           26 Mar 14 08:16
/usr/include/linux ->
> ./src/linux/include/linux
> shackle-at-feed> ls -ld /usr/src/linux
> lrwxrwxrwx   1 root     root           17 Mar 15 09:47 /usr/src/linux ->
> rtlinux-2.0/linux
> shackle-at-feed> ls -ld /usr/src/linux/include/linux
> drwxr-xr-x   7 root     root         8192 May  5 09:40
> /usr/src/linux/include/linux
>
> Can you run these ls -ld commands to find out which link you may be
missing.
> I vaguely remember that I had to change the one in /usr/src which used to
point
> to linux-2.2.12 to  rtlinux-2.0/linux for some reason. Perhaps you need to
> change yours form linux-2.2.5 to rtlinux-2.2.
>
>
>
>
>
> -- Will
>
>
>
>
>
>
>
> ---------------------------------------------------------------
> William Penn Shackleford III shackle-at-nist.gov
> National Institute of Standards & Technology Tel: (301) 975-4286
> 100 Bureau Drive Stop 8230  FAX: (301) 990-9688
> Gaithersburg MD  20899  USA
> http://www.isd.mel.nist.gov/personnel/shackleford/
> Office Location: Bldg. 220 Rm A253
>
>
>