Re: new EMC release

[Will Shackleford <shackle-at-cme.nist.gov>]

> Date: Mon, 8 May 2000 14:27:01 -0400 (EDT)
> Originator: emc-at-nist.gov
> From: William Scalione <scalione-at-netarrant.net>
> To: Multiple recipients of list <emc-at-nist.gov>
> Subject: Re: new EMC release
> X-Listprocessor-Version: 6.0c -- ListProcessor by Anastasios Kotsikonas
> Content-Transfer-Encoding: 7bit
> X-CC: scalione-at-netarrant.net
> X-To: emc-at-nist.gov
> MIME-Version: 1.0
> 
> 
> I'm having a  problem trying to get my kernal compiled with
> the real time ext. I allready have RH5.2 and EMC working great
> but I thought I would try a upgrade. Removed the harddrive 
> and put in another (so I can always go back to 2.0.36 version)
> formatted and installed RH 6.0 with kernal 2.2.5. downloaded
> prepatched kernal 2.2a. Ran xconfig, "make dep", and "make clean"
> So far so good. When I try "make zImage" or "make bzImage" I get the
> following error. any ideawhat file is missing?
> 
> root-at-;ocalhost# make zImage     (This line is what I type, below is waht
> I get)
> 
> gcc -Wall Wstrict-prototypes -O2 -fomit-frame-pointer -o
> scripts/split-include scripts/split-include.c
> 
> In file included from /usr/include/errno.h:36,
>                  from scripts/split-include.c :26:
> /usr/include/bits/errno.h:25: linux/errno.h: No such file or directory
> make: *** [scripts/split-include] Error 1
> 
> Thanks
> Bill
> scalione-at-netarrant.net
> 

My guess would be that the directory setup has broken one of the 
symbolic links needed to find
Here is what I have:


shackle-at-feed> ls -ld /usr/include/linux
lrwxrwxrwx   1 root     root           26 Mar 14 08:16 /usr/include/linux -> 
../src/linux/include/linux
shackle-at-feed> ls -ld /usr/src/linux
lrwxrwxrwx   1 root     root           17 Mar 15 09:47 /usr/src/linux -> 
rtlinux-2.0/linux
shackle-at-feed> ls -ld /usr/src/linux/include/linux
drwxr-xr-x   7 root     root         8192 May  5 09:40 
/usr/src/linux/include/linux

Can you run these ls -ld commands to find out which link you may be missing.
I vaguely remember that I had to change the one in /usr/src which used to point 
to linux-2.2.12 to  rtlinux-2.0/linux for some reason. Perhaps you need to 
change yours form linux-2.2.5 to rtlinux-2.2.





-- Will







---------------------------------------------------------------
William Penn Shackleford III			shackle-at-nist.gov
National Institute of Standards & Technology	Tel:	(301) 975-4286
100 Bureau Drive Stop 8230  			FAX:	(301) 990-9688
Gaithersburg MD  20899  USA
http://www.isd.mel.nist.gov/personnel/shackleford/
Office Location: Bldg. 220 Rm A253