Re: Several questions

Subject: Re: Several questions
From: "Joel Jacobs" <jj-at-netexp.net>
Date: Wed, 15 Mar 2000 11:24:14 -0500
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="iso-8859-1"
References: <005f01bf8d17$32d13980$b745b6cd-at-leadsled> <38CD6D37.6C1C-at-netarrant.net> <008801bf8ddd$398a0a60$ae45b6cd-at-leadsled> <38CEB8B1.B7FD820C-at-artsci.wustl.edu>



----- Original Message -----
From: "Jon Elson" <jmelson-at-artsci.wustl.edu>
>
> Note that feed rates, as set in the G-code, and as set and displayed on
the
> screen, are in inches/minute.  But, in the .ini file, they are in user
units
> per SECOND!  So, divide your IPM max and default feedrates by
> 60 before entering into the .ini file parameters.  (Note that 5 x 60 =
300.)
>
> Jon

Ok, thanks!  It works fine now....

Joel

References:
- Several questions
  - From: "Joel Jacobs" <jj-at-netexp.net>
- Re: Several questions
  - From: William Scalione <scalione-at-netarrant.net>
- Re: Several questions
  - From: "Joel Jacobs" <jj-at-netexp.net>
- Re: Several questions
  - From: Jon Elson <jmelson-at-artsci.wustl.edu>

Prev by Date: Re: emc spindle
Next by Date: Re: emc spindle
Prev by thread: Re: Several questions
Next by thread: Re: Several questions

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact