RE: NIC- eth0

[Kurtis Martineau <klmartineau-at-shaw.ca>]

Solved...For now am using different NIC.

Kurtis


> -----Original Message-----
> From: emc-at-nist.gov [emc-at-nist.gov]On Behalf Of Kurtis Martineau
> Sent: Wednesday, February 05, 2003 12:22 PM
> To: Multiple recipients of list
> Subject: NIC- eth0
>
>
>
> Okay heres another,
>
> The BDI2-18 didn't prompt me for network configuration even though I had a
> NIC plugged in.  I used linuxconf to select eth0 and the module
> for the card
> (dmfe in my case).  With my previous installation I set the mode
> to Dhcp and
> made sure that DNS was enabled.  Restarting with network restart from
> /etc/rc.d/init.d returns eth0 FAILED.
>
> I am connected to a cable modem and previously these steps would
> connect to
> the internet.
>
> This one is an Archtek 10/100 TX Local Area Network Adapter. I'll try a
> different NIC now.
>
> Kurtis
>
>
>
>