Re: emc port for Galil control

Subject: Re: emc port for Galil control
From: Jeff Mak <jeffm-at-perceptek.com>
Date: Thu, 28 Nov 2002 09:52:40 -0500
Content-Type: text/plain; charset="us-ascii"; format=flowed
In-Reply-To: <3DE5EFB4.1900568B-at-neo.rr.com>
References: <5.1.1.6.0.20021126233322.00b33c30-at-pop.broadband.rogers.com> <3DE4786D.2020004-at-pico-systems.com>


Interesting though but true. May be I should look for the port for the 
g-code interpreter.

jeff

At 05:39 AM 11/27/02 -0500, you wrote:

>Wouldn't that then be a controller controlling a controller?
>Bill
>
>Jon Elson wrote:
>
> > jeff mak wrote:
> >
> > >
> > > Hi,
> > >
> > > Is there a port or driver that make the emc work with the Galil Motion
> > > Controllers.
> >
> > As far as I know, no.
> >
> > Jon

References:
- emc port for Galil control
  - From: jeff mak <jeffm-at-eginno.com>
- Re: emc port for Galil control
  - From: Jon Elson <elson-at-pico-systems.com>
- Re: emc port for Galil control
  - From: williamj <williamj-at-neo.rr.com>

Prev by Date: Re: bitmap to g-code software
Next by Date: EMC and Red Hat 8.0
Prev by thread: Re: emc port for Galil control
Next by thread: Why 2.16 won't work

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact