Re: emc port for Galil control

Subject: Re: emc port for Galil control
From: williamj <williamj-at-neo.rr.com>
Date: Thu, 28 Nov 2002 05:28:04 -0500
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
References: <5.1.1.6.0.20021126233322.00b33c30-at-pop.broadband.rogers.com> <3DE4786D.2020004-at-pico-systems.com>


Wouldn't that then be a controller controlling a controller?
Bill

Jon Elson wrote:

> jeff mak wrote:
>
> >
> > Hi,
> >
> > Is there a port or driver that make the emc work with the Galil Motion
> > Controllers.
>
> As far as I know, no.
>
> Jon

Follow-Ups:
- Re: emc port for Galil control
  - From: Jeff Mak <jeffm-at-perceptek.com>

References:
- emc port for Galil control
  - From: jeff mak <jeffm-at-eginno.com>
- Re: emc port for Galil control
  - From: Jon Elson <elson-at-pico-systems.com>

Prev by Date: Re: emc port for Galil control
Next by Date: bitmap to g-code software
Prev by thread: Re: emc port for Galil control
Next by thread: Re: emc port for Galil control

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact