EMC Scaling problem

Subject: EMC Scaling problem
From: helga/michael <MPALFRAM-at-bellsouth.net>
Date: Thu, 22 Aug 2002 22:43:41 -0500
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii; format=flowed
User-Agent: Mozilla/5.0 (Windows; U; Win98; en-US; rv:1.0.0) Gecko/20020530



We have installed EMC ,(using BDI) on a Bridgeport Mill and are 
evaluating performance on a single axis before proceeding into a 
complete retrofit.

   Positioning is accurate and repeatable and responce satisfactory 
however scaling is off by 10.
   A command, manual or MDI, of  one 1 inch will produce an displacement 
of 0.1 inch,etc..

Calculated  INPUT_SCALE is 1000 from 200 steps per revolution, 5 
revolutions/inch.

We have reviewed all available sources of information with no luck. Any 
help would be appreciated.
                            mjp

Follow-Ups:
- Re: EMC Scaling problem
  - From: "Shelbyville Design & Signworks" <signworks-at-mcleodusa.net>
- RE: EMC Scaling problem
  - From: "Tim Goldstein" <timg-at-ktmarketing.com>

Prev by Date: EMC Bug ??
Next by Date: RE: EMC Scaling problem
Prev by thread: Re: REQUEST
Next by thread: RE: EMC Scaling problem

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact