RE: weird BDI-TNG problem

Subject: RE: weird BDI-TNG problem
From: "John Guenther" <j.guenther-at-verizon.net>
Date: Mon, 6 Jul 2020 11:13:42 -0400
Content-Type: multipart/mixed; boundary="------------InterScan_NT_MIME_Boundary"
Importance: Normal
In-Reply-To: <003701c224fb$23033840$8400a8c0-at-design>

try setting the dead band to .0001. I had this problem and that stopped it.

John Guenther

-----Original Message-----
From: emc-at-nist.gov [emc-at-nist.gov]On Behalf Of Shelbyville Design & Signworks
Sent: Saturday, July 06, 2002 10:53
To: Multiple recipients of list
Subject: weird BDI-TNG problem

ok, I've installed BDI-TNG and I have a really weird problem...

this machine is set up with removable hard drives,

one with windows and one with BDI-TNG.

with cnc pro, machine runs fine, steppers step, etc....

with BDI, machine moves, but all 3 axes crawl when

there is no movement indicated...is this a PID issue?

or tuning, or?????

Erie Patsellis
Shelbyville Design & Signworks
1309 W. S. 7th Street
Shelbyville, IL 62565
(217)774-4444
visit our website at www.shelbyvilledesign.com

References:
- weird BDI-TNG problem
  - From: "Shelbyville Design & Signworks" <signworks-at-mcleodusa.net>

Prev by Date: RE: Angular axis
Next by Date: Re: EMC vs. Galil Motion card (was: Will emc work for me?)
Prev by thread: weird BDI-TNG problem
Next by thread: Angular axis

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact