Re: [CAD_CAM_EDM_DRO] How to setup STG-II?

["Les Watts" <leswatts-at-rabun.net>]

I uploaded my emc.ini to the engineering web site below. Follow the links to
the cnc page.

Les

Leslie Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.rabun.net/~leswatts/wattsfurniturewp.html
engineering page:
http://www.rabun.net/~leswatts/shop.html

----- Original Message -----
From: "Paul" <paul.corner-at-tesco.net>
To: "Multiple recipients of list" <emc-at-nist.gov>
Sent: Wednesday, May 15, 2002 3:18 PM
Subject: Re: [CAD_CAM_EDM_DRO] How to setup STG-II?


>
>
> Hi Babar
>
> Must have missed your earlier posts on the problems you're having...
>
> After spending half an hour or so with Les Watts, a small problem was
> discovered with the homing pulse and the STG II card (EMC does not see the
> encoder index pulse). Just two lines of code in the stg sources fixed it
> along with a minor change to generic.run to allow the use of newstgmod.
> These modifications have been committed to Sourceforge, but I can send you
a
> patch off list if you have trouble accessing the repository.
>
> Les Has some excellent schematics for wiring up the switches to an STG
card
> and his ini file does work.
>
> Regards, Paul.
>
>
>
> On Wednesday 15 May 2002 16:15, Babar wrote:
> > 5)Paul... I am anxiously waiting for your advice
> > against my this and previous post.
>
>