Re: Lube Sense input

Subject: Re: Lube Sense input
From: Ray Henry <rehenry-at-up.net>
Date: Wed, 8 May 2002 14:32:59 -0500
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="iso-8859-1"
In-Reply-To: <02f401c1f69f$71904dc0$7701a8c0-at-tdsway.com>
Organization: RHE
References: <02f401c1f69f$71904dc0$7701a8c0-at-tdsway.com>

Pat

If you have autolube set up, this pin will tell you that it's working.  
Normally this is done with some sort of timeout loop.  If this pin isn't 
changed for a few seconds/minutes every so often, it will falt the machine.  
It could be hooked to a pressure sensor switch that sits on the lube manifold.

HTH

Ray

On Wednesday 08 May 2002 12:58, you wrote:
> Ok, what is this for?
>
> Pat

References:
- Lube Sense input
  - From: "Patrick Riedlinger" <patr-at-precidesign.com>

Prev by Date: Re: Lube Sense input
Next by Date: INDEX variables
Prev by thread: Re: Lube Sense input
Next by thread: EMC INDEX values

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact