Re: All Axes missing with motion code?

["Dean L. Hedin" <dlh2001-at-comcast.net>]

Strange,  have you tried replacing the offending line by
filling in the previous settings of the other axis i.e,
G01 X-0.1521 Y-0.4102 Z0.1  

On Friday 19 April 2002 10:41 pm, you wrote:
> I am getting this message:
> "All axes missing with motion code" when verifying my
> program.  Here is a fragment of that code:
>
> G03 X-0.1521 Y-0.4102 I0.3662 J0.2394
> BAD=> G01 Z0.1
> G90 G00 G49
> X0 Y0 Z0.1
> M2
>
> The error message points to a line which specifies Z but not X and Y.
> But X and Y should be taken as the same as they were from
> the end of the previous motion G03
>
> Any ideas as to why this is an error and how I can fix it?