Re: Learning BDI Emc - Outputs

[Paul <paul.corner-at-tesco.net>]

Hi Jack

>From "man cdrecord", you need the --scanbus option to determine the dev 
setting of your drive. For my setup, dev=0,0,0

[root-at-Talia root]# cdrecord --scanbus
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
scsibus0:
        0,0,0     0) 'CyberDrv' 'CW038D CD-R/RW  ' '100C' Removable CD-ROM
        0,1,0     1) *


This assumes that you have the relevant scsi modules loaded IDE drives need 
to use the scsi emulation mode provided be ide-scsi. A read of the 
CD-Writing-HOWTO is recommended.

Regards, Paul.


On Tuesday 08 January 2002 11:16 pm, Jack Ensor wrote:
> Paul -
>
> I just got a download and a CD burned of bdiemc-2.11-01.img from
>
> http://www.yty.net/cnc/bdi.html
>
> and the instructions say to use the command:
>
> cdrecord -v speed=8 dev=1,0,0 -pad -data bdiemc-2.11-01.img
>
> where speed and dev parameters are edited to match your
> CDR-configuration.
>
> My CD drive is 32X but I have no idea what the dev parameters may be.
> Have you any suggestions on this?
>
> Jack Ensor