RE: EMC Control Panel

[Ethan Vos <ethan-at-forward.ca>]

It looks and works real good except that it does not like either angular or 
large moves. As soon as I added a 4th axis and put in A30 I got a linear 
error.

I removed the 4th axis and changed Y to angular and it did the same thing.

I changed Y to linear and it still did the same thing so I think it's the 
large # (30) that does it. I'm not sure though, because the line of code 
that was highlighted in the bottom section did not have a rotary move.

If I run my program with the display set at three axis, ignoring the A, 
things work fine.

Oh yeah, the Set_Coordinates tcl still seems to be displaying metric while 
imperial is being entered in, juts like the bin version.

Ethan


-----Original Message-----
From:	Ray [SMTP:rehenry-at-up.net]
Sent:	Tuesday, September 11, 2001 2:49 PM
To:	Multiple recipients of list
Subject:	Re: EMC Control Panel

 << File: raytk.tgz >>
Bill

I still seem to have a problem with mdi mode but here it is.

Feedback will be appreciated.

Ray

On Tue, 11 Sep 2001, you wrote:
> Ray,
>
> I have 2 computers with EMC, one with the original BDI and one
> with your tarball of 08/01. I can check it on both before you post
> it, if you want to email it to me.
>
> Bill