RE: Follow-Error

Subject: RE: Follow-Error
From: "Tim Goldstein" <timg-at-ktmarketing.com>
Date: Sun, 17 Jun 2001 14:15:01 -0600
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="iso-8859-1"
Importance: Normal
In-Reply-To: <01061721403200.01075-at-malte>
Reply-To: <timg-at-ktmarketing.com>


Don't know if it makes any difference, but with steppermod I have always put
the output_scale parameter as 1. With Freqmod it has to be = to you steps
per inch.

Tim
[Denver, CO]

> -----Original Message-----
> From: emc-at-nist.gov [emc-at-nist.gov]On Behalf Of Malte Rütemann
> Sent: Sunday, June 17, 2001 1:51 PM
> To: Multiple recipients of list
> Subject: Follow-Error
>
>
> Hello,
> when I dirive the axes in manual mode I get a Follow-error after
> some time.
> Here is my conf.
> Thanks a lot
> Malte
>
>

Follow-Ups:
- Re: Follow-Error
  - From: "Ian Wright" <Ian-at-iw63.freeserve.co.uk>
- Re: Follow-Error
  - From: Chris Stratton <stratton-at-mdc.net>

References:
- Follow-Error
  - From: Malte Rütemann <malte-at-micompan.de>

Prev by Date: Re: Home switch oddities
Next by Date: Re: Follow-Error
Prev by thread: Follow-Error
Next by thread: Re: Follow-Error

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact