Stepping frequency/5-Axis-milling

Subject: Stepping frequency/5-Axis-milling
From: Till Franitza <xfa-at-isw.uni-stuttgart.de>
Date: Sun, 22 Oct 2000 11:11:55 +0200
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
References: <Pine.LNX.4.21.0010201551260.17831-100000-at-edgar.blauedonau.com>


Hi all!
I got mai from somebody running EMC on his Stepper Milling machine. He was
happily surprised of the quality he found.
Although he had two questions:

1.: How high can the stepping frequency be? Higher than 5 khz? Depends on
the Processor, of course, but what are common values that are achieved by
users?

2.: When will the 5-Axes-functionality be ready?

Till

References:
- Re[2]: emc build questions
  - From: "Terry L. Ridder" <terrylr-at-blauedonau.com>

Prev by Date: Re: Single Servo circuit / computer&touch panel combo
Next by Date: Re: Single Servo circuit / computer&touch panel combo
Prev by thread: Re[1]: iosh.cc & /usr/include/sys/io.h conflict.
Next by thread: Re: Re[1]: emc build questions

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact