Re: Spindle motor control problems

Subject: Re: Spindle motor control problems
From: Ray <rehenry-at-up.net>
Date: Wed, 11 Oct 2000 19:00:02 -0500
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
In-Reply-To: <39E4BC23.808DF6B7-at-artsci.wustl.edu>
References: <39DE43CE.5590DA36-at-nist.gov> <00101108502501.01030-at-localhost.localdomain> <39E4BC23.808DF6B7-at-artsci.wustl.edu>
Reply-To: rehenry-at-up.net



Jon

But you are still having the problems that you described?

Ray


On Wed, 11 Oct 2000, Jon wrote:

> Thanks for looking into this.  It turns out I'm back to running the Dec-20-1999
> version, and it doesn't seem to have any code to support LUBE_WRITE_INDEX.
> I searched all over, and it only has the LUBE_SENSE_INDEX.
> 
> But, I may have to move up to a newer version.
> 
> Jon

References:
- Watch out for missing [EMCIO] LUBE_WRITE_INDEX
  - From: Fred Proctor <frederick.proctor-at-nist.gov>
- Re: Spindle motor control problems
  - From: Ray <rehenry-at-up.net>
- Re: Spindle motor control problems
  - From: Jon Elson <jmelson-at-artsci.wustl.edu>

Prev by Date: Re[1]: emc on microway alpha pc?
Next by Date: Re: emc-0.9-25.src.tgz
Prev by thread: Re: Spindle motor control problems
Next by thread: Re:VHDL anyone ?

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact