dual processor for dual cnc machines

Subject: dual processor for dual cnc machines
From: Doug Fortune <pentam-at-home.com>
Date: Mon, 05 Jun 2000 20:08:30 -0600
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
Organization: Pentam Aerospace
References: <90.4f74630.26645056-at-aol.com>
Reply-To: pentam-at-home.com
Sender: doug-at-ridley.nist.gov


I was wondering if anyone has tried to
run a dual processor Linux machine to
run two cnc machines simultaneously.

The computer in question is an ancient dual PII-333.

Doug Fortune

Follow-Ups:
- Re: dual processor for dual cnc machines
  - From: Fred Proctor <frederick.proctor-at-nist.gov>
- Re: dual processor for dual cnc machines
  - From: Jon Elson <jmelson-at-artsci.wustl.edu>

References:
- Re: [CAD_CAM_EDM_DRO] EMC report, finally
  - From: WAnliker-at-aol.com

Prev by Date: Re: [CAD_CAM_EDM_DRO] EMC report, finally
Next by Date: Re: dual processor for dual cnc machines
Prev by thread: Re: [CAD_CAM_EDM_DRO] EMC report, finally
Next by thread: Re: dual processor for dual cnc machines

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact