Re: [CAD_CAM_EDM_DRO] EMC software and ServoToGo board.

Subject: Re: [CAD_CAM_EDM_DRO] EMC software and ServoToGo board.
From: Fred Proctor <proctor-at-cme.nist.gov>
Date: Thu, 24 Feb 2000 09:19:34 -0500
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
References: <950815078.5952-at-onelist.com> <38B40F11.16C92F30-at-cme.nist.gov> <38B41137.B8B7C08B-at-nafis.fp.trw.com>
Reply-To: frederick.proctor-at-nist.gov

John Guenther wrote:

> Is there any probability that EMC will be ported to RedHat 6.0 or 6.1 in the near future?

We have a port to Linux 2.2.13/RT Linux 2.0, which should work with the
Red Hat 6.X distributions. We'll put a new release on the FTP site for
both the Linux 2.0.36 and 2.2.13 platforms this weekend.

--Fred

References:
- Re: [CAD_CAM_EDM_DRO] EMC software and ServoToGo board.
  - From: Fred Proctor <proctor-at-cme.nist.gov>

Prev by Date: Re: Homebrew STG card
Next by Date: SV: [CAD_CAM_EDM_DRO] EMC software and ServoToGo board.
Prev by thread: Re: [CAD_CAM_EDM_DRO] EMC software and ServoToGo board.
Next by thread: SV: [CAD_CAM_EDM_DRO] EMC software and ServoToGo board.

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact