Re: Colored pins for EMC map-- reply with city, state, country

[Ray Henry <rehenry-at-up.net>]

Fred +

Crystal Falls, MI 49920 USA.  I'll put in the zip 'cause you'll need a
detailed map to find it.  Hint.  It's about 100 miles north and 30 miles
west of Green Bay, WI. (bring snowshoes)

Along with Paul Corner, I'm responsible for the virtual machine that Ian
loves to watch.  You may want to use a clear pin for that one. ;-) 

I have a Moog hydrapoint with 24 tool holder that I'm getting close to
setting up. I believe that I can integrate the tool changer and all of the
necessary extra I/O with the new iosh and tcl. 

I also have 3 Hardinge chnc chuckers with AB 7360 controls that need emc as
soon as we get real spindle feedback.  

I've been playing with both steppers and servos.

Ray


At 05:41 PM 2/14/2000 -0500, you wrote:
>EMC folks,
>
>I'd like to put up a map with colored pins on it marking the location of
>an EMC. If you are working with one, can you reply with your city,
>state/region, and country, and a brief description of your machine and
>application?
>
>A graphic of this would be nice to have on the web site. I'll put what I
>get onto this list or the dropbox.
>
>--Fred
>
>
>