RE: tkemc-4

Subject: RE: tkemc-4
From: Ray Henry <rehenry-at-up.net>
Date: Tue, 04 Jan 2000 14:07:37 -0600
Content-Type: text/plain; charset="us-ascii"
In-Reply-To: <81D4BC3A025AD11192A700805FC1BC70420ECC-at-MS1>

Don

I worked out a few more of the problems with tkemc4.  I'll send it to
linuxcnc as soon as they are running full speed.  

If you have EMC running I could email you a copy of it.

Ray

At 08:33 AM 1/4/2000 -0500, Don wrote:

>	I'm new to the list and have a keen interest in both the
>software and hardware for 3 to 6 axis machines. It would be
>convenient to have tkemc-4 available by ftp from linuxcnc.
>don kelley

Follow-Ups:
- Re: tkemc-4
  - From: Jon Elson <jmelson-at-artsci.wustl.edu>

References:
- RE: tkemc-4
  - From: Donald Kelley <dkelley-at-wilson.edu>

Prev by Date: Re: tkemc problem
Next by Date: Re: tkemc-4
Prev by thread: RE: tkemc-4
Next by thread: Re: tkemc-4

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact