next up previous contents index
Next: 11.7 G86 Cycle Up: 11. Canned Cycles Previous: 11.5 G84 Cycle   Contents   Index

11.6 G85 Cycle

The G85 cycle is intended for boring or reaming.

0. Preliminary motion, as described above.

1. Move the Z-axis only at the current feed rate to the Z position.

2. Retract the Z-axis at the current feed rate to clear Z. This motion is very similar to g81 except that the tool is retracted from the hole at feedrate rather than rapid.



root 2003-05-26