Re: PDP-8

Subject: Re: PDP-8
From: Michael Coffey <mdynac-at-prodigy.net>
Date: Thu, 13 Mar 2003 14:39:35 -0600
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii; format=flowed
In-Reply-To: <BA95FE90.12A0%dengvall-at-charter.net>
Organization: Midnight Electronics
References: <BA95FE90.12A0%dengvall-at-charter.net>
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.3b) Gecko/20030211

Dave Engvall wrote:
> Michael,
> Not everything you need but a start.
> 
> 
> http://www.wikipedia.org/wiki/PDP-8
> 
> Dave Engvall
> 
> 
Please do not get me wrong,
I am not attempting to port EMC to a pd8\a,
I have replaced the pdp8\a, using a pentium machine
running EMC, with good results....
I have converted the Andrew O/S from punch tape to floppy, if you like
I can email the 26Kb file to you for further inspection..

I am not going into explicit circuit detail here, but
the concept has been applied, it works, and I am confident that my approach
will result in a working EDM, running on EMC....
That is my goal.
Michael

References:
- PDP-8
  - From: Dave Engvall <dengvall-at-charter.net>

Prev by Date: Re: PDP-8
Next by Date: Re: emc for wire edm control
Prev by thread: Re: PDP-8
Next by thread: emc for wire edm control

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact