Re: CNC lathe threading?

Subject: Re: CNC lathe threading?
From: Ray Henry <rehenry-at-up.net>
Date: Wed, 12 Mar 2003 21:40:19 -0600
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="iso-8859-1"
In-Reply-To: <153.1cf9e8cc.2ba14070-at-aol.com>
References: <153.1cf9e8cc.2ba14070-at-aol.com>
Reply-To: rehenry-at-up.net

Lee

The tool changer commands are available from the interpreter.  M4 T# tells 
the interpreter which tool to run.  There are prep commands and change 
commands.  These are carried through to the io programs but no specific set 
of logical instructions have been written in because few tool changers work 
the same.

Ray

On Wednesday 12 March 2003 08:14 pm, you wrote:
> Does the EMC operate a tool changer?
>                                 Thanks; Lee

References:
- Re: CNC lathe threading?
  - From: Leekissner-at-aol.com

Prev by Date: Re: CNC lathe threading?
Next by Date: Re: emc for wire edm control
Prev by thread: Re: CNC lathe threading?
Next by thread: Accumulating position error with servo system

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact