Re: STG Card compatibility

["Les Watts" <leswatts-at-alltel.net>]

Uh oh... this is starting to look like a recurring problem with recent STG/
EMC installations.

Please review the past messages on this subject.

Could you give us more details on your EMC version and setup?

Also how does the STGdiag program perform?

Les

Leslie Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.alltel.net/~leswatts/wattsfurniturewp.html
engineering page:
http://www.alltel.net/~leswatts/shop.html
Surplus cnc for sale:
http://www.alltel.net/~leswatts/forsale.html
----- Original Message -----
From: "aamir zaheer" <aamir_04-at-hotmail.com>
To: "Multiple recipients of list" <emc-at-nist.gov>
Sent: Wednesday, December 18, 2002 11:41 PM
Subject: Re: STG Card compatibility


>
> Hi ,
> I have successfully interfaced my STG-II card with the motor. In the LSTG
it
> is working fine but as soon as I open the EMC program, the program takes
> input from the encoder for a few seconds and then the computer hangs.when
we
> slowly move the encoder shaft its working all right but when we move the
> shaft with the greater RPM its become hang .I am using only the X-axis for
> testing purposes. I am using Pentium-II computer. Please advice about this
> situation.
> Thankyou,
> Aamir Zaheer
>
>
>
>
>
>
>
> >From: Ray Henry <rehenry-at-up.net>
> >Reply-To: rehenry-at-up.net
> >To: "aamir zaheer" <aamir_04-at-hotmail.com>
> >Subject: Re: STG Card compatibility
> >Date: Wed, 18 Dec 2002 11:22:49 -0600
> >
> >
> >Hi Aamir
> >
> >Glad to hear that you are making progress.  I suspect that this is a
> >driver problem within the EMC.  I am not really competent to answer most
> >STG questions but if you ask the emc-at-nist.gov list there will be people
> >who will know right away what the problem is.  When you write, include
> >the EMC date or BDI version and the name of the driver, stgmod.o or
> >whatever you are trying to ask it to run.
> >
> >Sorry that I can't help you more.  If you are not on the emc list you can
> >still post and ask people to respond to you as well as to the list.  You
> >can sign up for the list using the directions found under links at
> >www.linuxcnc.org
> >
> >Ray
> >
> >
> >
> >
> >On Wednesday 18 December 2002 12:36 am, you wrote:
> > > Hi Ray,
> > >    How are you? I have some news about the STG I was working on.I have
> > > successfully interfaced my STG-II card with the motor. In the LSTG it
> > > is working fine but as soon as I open the EMC program, the program
> > > takes input from the encoder for a few seconds and then the computer
> > > hangs. I am using only the X-axis for testing purposes. I am using
> > > Pentium-II computer. Please advice about this situation.
> > > Thankyou,
> > > Aamir Zaheer
> > >
> > >
> > >
> > > From: Ray Henry <rehenry-at-up.net>
> > >
> > > >Reply-To: rehenry-at-up.net
> > > >To: "aamir zaheer" <aamir_04-at-hotmail.com>
> > > >Subject: Re: BDI disk
> > > >Date: Sun, 15 Sep 2002 10:03:34 -0500
> > > >
> > > >
> > > >Aamir
> > > >
> > > >Is this a model 1 or 2 stg board?
> > > >
> > > >Ray
> > >
> > > _________________________________________________________________
> > > Help STOP SPAM with the new MSN 8 and get 2 months FREE*
> > > http://join.msn.com/?page=features/junkmail
>
>
> _________________________________________________________________
> Add photos to your messages with MSN 8. Get 2 months FREE*.
> http://join.msn.com/?page=features/featuredemail
>
>
>