RE: Some comments about new project are welcome

Subject: RE: Some comments about new project are welcome
From: "Eric Keller" <eek105-at-psu.edu>
Date: Wed, 11 Dec 2002 11:25:24 -0800
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="us-ascii"
Importance: Normal
In-Reply-To: <3DF75BBD.7070107-at-ualg.pt>


I don't see why you can't do this, the only issue I see is getting a working
post.
Eric


-----Original Message-----
From: emc-at-nist.gov [emc-at-nist.gov]On Behalf Of Filipe Tomaz
Sent: Wednesday, December 11, 2002 7:36 AM
To: Multiple recipients of list
Subject: Re: Some comments about new project are welcome



mjf46-at-juno.com wrote:

>Cad Cam = Free
>  SurfCam is 2 1/2 Axis = Free
>  Visual Mill 3 Axis = Free
>
>
>
>
But with this setup, you use Windows for the CAD CAM, and then EMC / Linux ?
I've checked the Surfcam, and it is very good.

References:
- Re: Some comments about new project are welcome
  - From: Filipe Tomaz <ftomaz-at-ualg.pt>

Prev by Date: Re: Some comments about new project are welcome
Next by Date: pulse train
Prev by thread: Re: Some comments about new project are welcome
Next by thread: List

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact