Re: freqmot.o settup problems

["William Scalione" <wscalione-at-nc.rr.com>]

> 
> hi all,
> finaly got my stepper driver back on line today. recompiled the latest
> cvs and all goes well. However I calculated the steps per inch at 5080 (
> 200step 1mm pitch ) , when i put it into the ini and start emc in mdi
> mode it dosnt drive correctly. I set it to g21 y1 and it only pulses
> aprox. 5 times ( nowhere near the required 5080 times ) . 
> Any help is welcomed
> 
> Thanks 
> Jason Cox
> 

Hi Jason,

G21 is the code for mm so if you send g21 y1 you are commanding a move
of 1 mm not 1 inch, try g20 for inch mode.

Bill

>