Re: Jog wheel

Subject: Re: Jog wheel
From: Paul <paul.corner-at-tesco.net>
Date: Mon, 3 Jun 2002 20:27:46 +0100
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="iso-8859-1"
In-Reply-To: <007f01c20b16$65e52fa0$a4efa218-at-.bdfrd.tx.home.com>
References: <725301F4D1E9D411A69F0002A507428E9422F7-at-nt-rmna-exch.ca.broadcom.com> <200206021458.g52Ew4RC023423-at-btc1.up.net> <007f01c20b16$65e52fa0$a4efa218-at-.bdfrd.tx.home.com>

Hi Bill

Could even use the parallel port interfaced directly to the encoder and 
impliment the counter in software - The speed required isn't particularly 
high, and as has already been commented on, missed pulses are not a major 
issue.

Regards, Paul.

On Monday 03 Jun 2002 4:58 pm, William Scalione wrote:
> I guess first decision needs to be if it will have any type of counter
> such as the LS7166, or if the encoder will be wired directly to one
> of the ports. How many encoders, one for each axis or just 1 with
> a switch to toggle the axis? What port, serial (would require a counter)
> parallel, game?

Follow-Ups:
- Re: Jog wheel
  - From: "William Scalione" <scalion-at-dellepro.com>

References:
- RE: info
  - From: "Dave Hylands" <dhylands-at-broadcom.com>
- Re: Jog wheel
  - From: Ray Henry <rehenry-at-up.net>
- Re: Jog wheel
  - From: "William Scalione" <wscalione-at-nc.rr.com>

Prev by Date: Re: Jog wheel
Next by Date: Re: Jog wheel
Prev by thread: Re: Jog wheel
Next by thread: Re: Jog wheel

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact