Re: EMC and CNCPRO

Subject: Re: EMC and CNCPRO
From: Brian Pitt <bfp-at-earthlink.net>
Date: Mon, 17 Dec 2001 22:42:18 -0800
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="iso-8859-1"
In-Reply-To: <3C1EBD03.3090001-at-betagliphs.com>
References: <20011214145031.15718.qmail-at-web13405.mail.yahoo.com> <200112142003.fBEK3Un10793-at-btc1.up.net> <3C1EBD03.3090001-at-betagliphs.com>
Reply-To: bfp-at-earthlink.net


if I'm reading the code right it would take some editing 
in the function smController(int arg) starting at line 2513 
of the emcsegmot.c file

maybe add a smClkPhasePolarity setting for the ini file?

Brian


On Monday 17 December 2001 20:06, you wrote:
> In CNCPRO there is a menu config under "Bit Settings" called "Step Bit
> Transition" set to either "low to high" or "high to low".
>
> Is there any way to set this in EMC?

Follow-Ups:
- Re: EMC and CNCPRO
  - From: M Doogan <med-at-betagliphs.com>

References:
- EMC and BDI install
  - From: Enrique Sanchez Vela <enrique_sanchez_vela-at-yahoo.com>
- Re: EMC and BDI install
  - From: Ray <rehenry-at-up.net>
- EMC and CNCPRO
  - From: M Doogan <med-at-betagliphs.com>

Prev by Date: EMC and CNCPRO
Next by Date: SIXNET eNewsLetter - Industrial Ethernet is here!
Prev by thread: EMC and CNCPRO
Next by thread: Re: EMC and CNCPRO

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact