Re: IO availability

Subject: Re: IO availability
From: Paul <Paul.Corner-at-tesco.net>
Date: Wed, 6 Jun 2001 18:31:38 +0100
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
In-Reply-To: <NEBBLJPKGLLANGCCBCALCEJKCAAA.dpm-at-enteract.com>
References: <NEBBLJPKGLLANGCCBCALCEJKCAAA.dpm-at-enteract.com>
Reply-To: paul.corner-at-tesco.net



Hi

Open up a console window and enter the following command:

cat /proc/ioports

Regards, Paul.


On Wed, 06 Jun 2001, DPM wrote:
> Hi guys,
> 
> 	I am using the BDI install, with a STG 2 board. I was wondering if there
> was a program packaged with the BDI (or one someone could recommend to
> download) that would show me which IO's were available, and if an IO is
> being used, what is using it. I want to make sure I am picking an IO for my
> STG that is not in conflict with anything else. Thanks for any suggestions.
> 
> -DPM

References:
- IO availability
  - From: "DPM" <dpm-at-enteract.com>

Prev by Date: Re: IO availability
Next by Date: smdromod.o COMPARED to freqmod.o
Prev by thread: Re: IO availability
Next by thread: emc G1 problem

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact